In the daily operation of laser cutting machine, the control panel is the most direct interactive window between the operator and the equipment. The normal operation of its buttons and display screen is directly related to the efficiency and safety of cutting work.
To ensure the stable operation of the equipment, REZES recommends regular control panel function test. The main inspection contents include:
1. Button response test: Press each operation button one by one to observe whether it is sensitive, whether there is any jamming or failure. Pay special attention to key buttons such as start, pause, and emergency stop.
2. Display screen inspection: Check whether the screen has dead spots, flickering, delayed display or poor touch. Ensure that parameter settings, alarm prompts and other contents are displayed clearly and accurately.
3. Signal feedback confirmation: After operating the button, confirm whether the machine performs the action as expected to ensure that the control signal can be accurately transmitted.
4. Panel cleaning and maintenance: Keep the surface of the control panel clean and dust-free, avoid liquid or oil infiltration to affect the circuit, and wipe the surface regularly with a clean and soft cloth.
The good condition of the control panel is the basis for the stable and safe operation of the laser cutting machine. Jinan REZES CNC Equipment Co., Ltd. reminds you: Regularly checking the button and display function can not only reduce the sudden failure rate, but also is a necessary measure to ensure the safety of the operator.
If you need more detailed inspection process or maintenance suggestions, please feel free to contact us.
Post time: Jul-03-2025
