Fiber laser cutting machine air system inspection guide ——Stable air pressure to maintain efficiency

In the auxiliary gas system of the fiber laser cutting machine, compressed air is widely used for cutting materials such as carbon steel. Stable air pressure is not only related to the cutting quality, but also affects the safety and life of the equipment.

Ⅰ. Importance of stable air pressure

* Ensure stable cutting effect, reduce burrs and slag

* Protect nozzles and lenses to avoid light pollution

* Reduce equipment failure rate and ensure production continuity

Ⅱ. Key points for air supply system inspection

1. Air compressor operation status

* Check whether it is frequently started and stopped, and whether it is running smoothly

* Whether the outlet pressure is stable within the set range

2. Air tank and pressure stabilization system

* Whether the air tank is drained in time

* Whether the pressure stabilization valve functions normally and the pressure gauge reading is accurate

3. Air pipe and joint

* Check whether there is leakage, looseness or aging along the entire line

* The pipeline direction is reasonable to avoid bending or blockage

4. Filtration and drying system

* Whether the filter element is blocked and should be replaced regularly

* The dryer operates normally to prevent water vapor from entering the system

5. Air pressure sensor and alarm device

* Whether the sensor works sensitively and is calibrated regularly

* Whether there is abnormal alarm record, such as insufficient air pressure and abnormal fluctuation

Ⅲ. Recommended frequency

Ⅳ. Summary

Although the gas supply system is often overlooked, it has a very important impact on the quality of laser cutting and the stability of the equipment. Daily inspection is a key step to ensure production efficiency.

If you have more technical questions, please feel free to contact Jinan REZES CNC Equipment Co., Ltd., we will provide you with professional support.